1 of 6: Product image 1 from 6, STYLPRO Wavelength Pro Light therapy device
STYLPRO Wavelength Pro 5 in 1 LED Face Mask
Light therapy device
Delivery with EU plug (Type C/F). For use in the Ireland, a suitable adaptor (Type G) is required, which, please note, is not included.
STYLPRO
OBELIS S.A, Bd. General Wahis 53, B-1030 Brussels, Belgium.
FOR YOUR SAFETY AND CONTINUED ENJOYMENT OF THIS PRODUCT, ALWAYS READ THE INSTRUCTIONS CAREFULLY BEFORE USE. Cosmetic device. Not intended to diagnose, treat, cure or prevent any disease. The product is intended for private use only and is not intended for commercial use or other applications. This is not a medical product or medical device.
SAFETY INSTRUCTIONS: We advise against using this device if you are epileptic, photophobic or photosensitive, if you are pregnant or breastfeeding or have had skin cancer or undergone facial plastic surgery in the last 12 months, unless under medical supervision, or if you have had skeletal reconstruction or a titanium implant; use with caution during your menstrual cycle. For adults only. Not intended for use by children. This is not a toy. Wipe gently with a damp cloth. If the STYLPRO™ WAVELENGTH PRO malfunctions or is damaged in any way, discontinue use immediately. Contact STYLPRO™ CUSTOMER SERVICE (see LIMITED TWO-YEAR WARRANTY section for contact details). WEAR WITH THE EYE PROTECTION PADS. Prolonged exposure to LED lights WITHOUT EYE PROTECTION may cause damage. LEDs are not interchangeable. Do not use on sensitive, irritated or injured skin, swollen or sun-damaged skin or other adverse skin conditions. DO NOT LOOK DIRECTLY INTO THE LED LIGHTS.
SELF-TEST: Test your sensitivity to light ON YOUR ARM before using THE DEVICE on your face: Press the On/Off/SETTING button. Place the device on your arm and perform a 10-minute session. After 10 minutes, turn the device off. Visually check the area. THE AREA MAY BEGIN TO TURN RED BECAUSE OF THE HEATING OF YOUR SKIN, BUT IF THE REDNESS Lasts LONGER THAN 2 HOURS, YOU MAY HAVE SKIN SENSITIVE TO LIGHT. SEEK MEDICAL ADVICE BEFORE DECIDING HOW BEST TO USE THIS DEVICE ON YOUR SKIN.
INSTRUCTIONS FOR USE: Face: Make sure the right and left straps are fastened and the eye protection pads are securely in place in the eye openings. To adjust the size of the LED mask, use the face attachments. Always start with the top fastening and switch to the bottom fastening to loosen the fit if necessary. Place the LED mask on your face and fasten the straps securely around the back of your head. Long press the power/function button to turn on the LED mask. To ensure that the face function is selected, briefly press the "Power/Function" button until the "Face" icon appears on the top panel of your controller. To select your desired mode, briefly press the "Mode" button. To find out which mode is best for you, please refer to our "MODES" overview below. Once you have selected your desired mode, enjoy a session of 10-15 minutes. To turn off the LED mask before you have finished your session, long press the power/function button.
Neck, Chest & Back: Loosen the fasteners and remove the eye protection pads while making sure the right and left straps are attached to the LED mask. Front of neck and chest: Place the LED mask on your chest and fasten the straps securely behind your neck. Let the LED mask rest on your collarbones and chest. Back of neck and upper back: Place the LED mask on your upper back and fasten the straps securely around the front of your neck. Let the LED mask rest on your neck and upper back. Tip: For a comfortable fit, leave the straps under your neck. Long press the power/function button to switch on the LED mask. To ensure that the Neck, Chest & Back function is selected, briefly press the "Power/Function" button until the "Neck" icon appears on the top control panel of your remote control. To select your desired mode, briefly press the 'Mode' button. To find out which mode is best for you, please refer to our "MODES" overview below. Once you have selected your desired mode, enjoy a 12-minute session. To turn off the LED mask before you have finished your session, long press the power/function button.
Hair: Loosen the fasteners and remove the eye protection pads while making sure the right and left straps are attached to the LED mask. Attach the fasteners to the hair fasteners located at the top of the mask. This will allow the mask to take on a 'dome' shape. Turn the LED mask over so that the small STYLPRO logo is now upright. Place the LED mask on your head and fasten the straps securely to the back of your head/upper neck. Make sure the mask covers your front hairline. Long press the power/function button to switch on the LED mask. To ensure that the Hair function is selected, briefly press the "Power/Function" button until the "Hair" icon appears on the top panel of your controller. Once the Hair function has been selected, you will enjoy a 15-minute session. To switch off the LED mask before you have finished your session, press and hold the power/function button.
SAFETY INFORMATION: Important! Do not look directly into the light. Always use the device with the eye protection pads fitted snugly on your face to minimize light entering your eyes. Red light products are not intended to diagnose, treat, cure or prevent any disease. Our products are low-risk, general wellness/fitness products that do not require medical approval. They are designed exclusively as "general wellness" products for home use. The LED mask should not be used more than once a day with the same setting. After using the mask, you can apply a moisturizer or other skin care products as part of your routine.
SAFETY ASPECTS: Using a red light device in a manner other than described in this manual will void the warranty and may result in serious injury. The STYLPRO™ WAVELENGTH PRO is an electrical device. To avoid electric shock, observe the following safety instructions: - Do not get the appliance wet or immerse it in water. - Do not clean electrical parts with water or liquids. - Do not touch the appliance or switch with wet hands. - Do not use or touch the device on wet or damp skin. - Do not pull, carry or lift the device by the charging cable. Do not use the device if the charging cable is damaged. - Do not use the device if it has been dropped, left outdoors or in contact with water or liquids. - Do not use on or near heated surfaces. - Do not modify or attempt to modify or repair the appliance. There are no user serviceable parts. - Do not use or store appliance in temperatures that reach or exceed 130°F (54°C).
WARNING: TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY: READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. THIS PRODUCT SHOULD NOT BE USED BY: CHILDREN, PREGNANT WOMEN, PATIENTS WITH EPILEPSY, TUMORS AND CANCER PATIENTS, PATIENTS WITH PACEMAKERS OR THE LIKE. REMOVE EYEGLASSES, ARTIFICIAL EYELASHES AND CONTACT LENSES BEFORE USE. IF YOU NOTICE ANY IRREGULARITIES IN YOUR SKIN DURING OR AFTER USE, PLEASE CONSULT YOUR MEDICAL SPECIALIST. DO NOT USE IN THE BATH OR SHOWER. Careful supervision is required when the appliance is used by or near children or persons weakened or disabled by illness or injury. DO NOT OPERATE THIS APPLIANCE IF IT MALFUNCTIONS OR HAS BEEN DROPPED OR DAMAGED IN ANY WAY. RETURN THE APPLIANCE TO THE NEAREST SERVICE CENTER FOR EXAMINATION, ELECTRICAL OR MECHANICAL ADJUSTMENT OR REPAIR. NO REPAIRS SHOULD BE CARRIED OUT BY THE CONSUMER. USE THE APPLIANCE ONLY FOR ITS INTENDED PURPOSE AS DESCRIBED IN THIS MANUAL. THE USE OF ACCESSORIES NOT RECOMMENDED BY STYLPRO™ MAY CAUSE HAZARDS. DO NOT USE OUTDOORS OR OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE USED OR OXYGEN IS ADMINISTERED. DO NOT PLACE ANY PART OF THE PRODUCT NEAR HEAT SOURCES SUCH AS RADIATORS, STOVES, ETC. PLACE. DO NOT PLACE ON A SOFT SURFACE SUCH AS A BED AS THE APPLIANCE MAY OVERHEAT. KEEP THE APPLIANCE AWAY FROM CORROSIVE LIQUIDS. CHOKING HAZARD DUE TO SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE. DO NOT SHARE THIS PRODUCT WITH OTHERS. PLEASE DO NOT USE WHILE CHARGING. (CANNOT BE USED WHILE CHARGING) CHECK THE DEVICE AND REMOTE CONTROL FOR DAMAGE BEFORE EACH USE. CONSULT A DERMATOLOGIST OR HEALTHCARE PROFESSIONAL IF YOU HAVE SENSITIVE SKIN, PREVIOUS HISTORY OF SKIN PROBLEMS OR ARE UNSURE IF THIS PRODUCT IS SUITABLE FOR YOUR SKIN TYPE.
SAFETY INSTRUCTIONS: We advise against using this device if you are epileptic, photophobic or photosensitive, if you are pregnant or breastfeeding or have had skin cancer or undergone facial plastic surgery in the last 12 months, unless under medical supervision, or if you have had skeletal reconstruction or a titanium implant; use with caution during your menstrual cycle. For adults only. Not intended for use by children. This is not a toy. Wipe gently with a damp cloth. If the STYLPRO™ WAVELENGTH PRO malfunctions or is damaged in any way, discontinue use immediately. Contact STYLPRO™ CUSTOMER SERVICE (see LIMITED TWO-YEAR WARRANTY section for contact details). WEAR WITH THE EYE PROTECTION PADS. Prolonged exposure to LED lights WITHOUT EYE PROTECTION may cause damage. LEDs are not interchangeable. Do not use on sensitive, irritated or injured skin, swollen or sun-damaged skin or other adverse skin conditions. DO NOT LOOK DIRECTLY INTO THE LED LIGHTS.
SELF-TEST: Test your sensitivity to light ON YOUR ARM before using THE DEVICE on your face: Press the On/Off/SETTING button. Place the device on your arm and perform a 10-minute session. After 10 minutes, turn the device off. Visually check the area. THE AREA MAY BEGIN TO TURN RED BECAUSE OF THE HEATING OF YOUR SKIN, BUT IF THE REDNESS Lasts LONGER THAN 2 HOURS, YOU MAY HAVE SKIN SENSITIVE TO LIGHT. SEEK MEDICAL ADVICE BEFORE DECIDING HOW BEST TO USE THIS DEVICE ON YOUR SKIN.
INSTRUCTIONS FOR USE: Face: Make sure the right and left straps are fastened and the eye protection pads are securely in place in the eye openings. To adjust the size of the LED mask, use the face attachments. Always start with the top fastening and switch to the bottom fastening to loosen the fit if necessary. Place the LED mask on your face and fasten the straps securely around the back of your head. Long press the power/function button to turn on the LED mask. To ensure that the face function is selected, briefly press the "Power/Function" button until the "Face" icon appears on the top panel of your controller. To select your desired mode, briefly press the "Mode" button. To find out which mode is best for you, please refer to our "MODES" overview below. Once you have selected your desired mode, enjoy a session of 10-15 minutes. To turn off the LED mask before you have finished your session, long press the power/function button.
Neck, Chest & Back: Loosen the fasteners and remove the eye protection pads while making sure the right and left straps are attached to the LED mask. Front of neck and chest: Place the LED mask on your chest and fasten the straps securely behind your neck. Let the LED mask rest on your collarbones and chest. Back of neck and upper back: Place the LED mask on your upper back and fasten the straps securely around the front of your neck. Let the LED mask rest on your neck and upper back. Tip: For a comfortable fit, leave the straps under your neck. Long press the power/function button to switch on the LED mask. To ensure that the Neck, Chest & Back function is selected, briefly press the "Power/Function" button until the "Neck" icon appears on the top control panel of your remote control. To select your desired mode, briefly press the 'Mode' button. To find out which mode is best for you, please refer to our "MODES" overview below. Once you have selected your desired mode, enjoy a 12-minute session. To turn off the LED mask before you have finished your session, long press the power/function button.
Hair: Loosen the fasteners and remove the eye protection pads while making sure the right and left straps are attached to the LED mask. Attach the fasteners to the hair fasteners located at the top of the mask. This will allow the mask to take on a 'dome' shape. Turn the LED mask over so that the small STYLPRO logo is now upright. Place the LED mask on your head and fasten the straps securely to the back of your head/upper neck. Make sure the mask covers your front hairline. Long press the power/function button to switch on the LED mask. To ensure that the Hair function is selected, briefly press the "Power/Function" button until the "Hair" icon appears on the top panel of your controller. Once the Hair function has been selected, you will enjoy a 15-minute session. To switch off the LED mask before you have finished your session, press and hold the power/function button.
SAFETY INFORMATION: Important! Do not look directly into the light. Always use the device with the eye protection pads fitted snugly on your face to minimize light entering your eyes. Red light products are not intended to diagnose, treat, cure or prevent any disease. Our products are low-risk, general wellness/fitness products that do not require medical approval. They are designed exclusively as "general wellness" products for home use. The LED mask should not be used more than once a day with the same setting. After using the mask, you can apply a moisturizer or other skin care products as part of your routine.
SAFETY ASPECTS: Using a red light device in a manner other than described in this manual will void the warranty and may result in serious injury. The STYLPRO™ WAVELENGTH PRO is an electrical device. To avoid electric shock, observe the following safety instructions: - Do not get the appliance wet or immerse it in water. - Do not clean electrical parts with water or liquids. - Do not touch the appliance or switch with wet hands. - Do not use or touch the device on wet or damp skin. - Do not pull, carry or lift the device by the charging cable. Do not use the device if the charging cable is damaged. - Do not use the device if it has been dropped, left outdoors or in contact with water or liquids. - Do not use on or near heated surfaces. - Do not modify or attempt to modify or repair the appliance. There are no user serviceable parts. - Do not use or store appliance in temperatures that reach or exceed 130°F (54°C).
WARNING: TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY: READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. THIS PRODUCT SHOULD NOT BE USED BY: CHILDREN, PREGNANT WOMEN, PATIENTS WITH EPILEPSY, TUMORS AND CANCER PATIENTS, PATIENTS WITH PACEMAKERS OR THE LIKE. REMOVE EYEGLASSES, ARTIFICIAL EYELASHES AND CONTACT LENSES BEFORE USE. IF YOU NOTICE ANY IRREGULARITIES IN YOUR SKIN DURING OR AFTER USE, PLEASE CONSULT YOUR MEDICAL SPECIALIST. DO NOT USE IN THE BATH OR SHOWER. Careful supervision is required when the appliance is used by or near children or persons weakened or disabled by illness or injury. DO NOT OPERATE THIS APPLIANCE IF IT MALFUNCTIONS OR HAS BEEN DROPPED OR DAMAGED IN ANY WAY. RETURN THE APPLIANCE TO THE NEAREST SERVICE CENTER FOR EXAMINATION, ELECTRICAL OR MECHANICAL ADJUSTMENT OR REPAIR. NO REPAIRS SHOULD BE CARRIED OUT BY THE CONSUMER. USE THE APPLIANCE ONLY FOR ITS INTENDED PURPOSE AS DESCRIBED IN THIS MANUAL. THE USE OF ACCESSORIES NOT RECOMMENDED BY STYLPRO™ MAY CAUSE HAZARDS. DO NOT USE OUTDOORS OR OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE USED OR OXYGEN IS ADMINISTERED. DO NOT PLACE ANY PART OF THE PRODUCT NEAR HEAT SOURCES SUCH AS RADIATORS, STOVES, ETC. PLACE. DO NOT PLACE ON A SOFT SURFACE SUCH AS A BED AS THE APPLIANCE MAY OVERHEAT. KEEP THE APPLIANCE AWAY FROM CORROSIVE LIQUIDS. CHOKING HAZARD DUE TO SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE. DO NOT SHARE THIS PRODUCT WITH OTHERS. PLEASE DO NOT USE WHILE CHARGING. (CANNOT BE USED WHILE CHARGING) CHECK THE DEVICE AND REMOTE CONTROL FOR DAMAGE BEFORE EACH USE. CONSULT A DERMATOLOGIST OR HEALTHCARE PROFESSIONAL IF YOU HAVE SENSITIVE SKIN, PREVIOUS HISTORY OF SKIN PROBLEMS OR ARE UNSURE IF THIS PRODUCT IS SUITABLE FOR YOUR SKIN TYPE.
EAN: 5060288332670
Your Statutory Warranty Rights
All physical items purchased in our store are covered by the statutory 2-year warranty for defects. The standardized EU notice below summarizes your basic rights: Download PDF